 |
 |
 |
 |
 |
 |
|
|
 |
 |
| Click here for complete details on PowerCore: |  |
Click here for PowerCore Installation Instructions
| PowerCore™: |
|
 |
 |
| The PowerCore ignition coil amplifier increases ignition
coil output performance of any inductive ignition system by up to
50%. A hotter, more powerful spark ignites every fuel/air mixture
much quicker, more reliably and more efficiently; thus increasing
horsepower and torque, whereas fuel consumption and emissions are
decreased. This never before available technology is truly revolutionary and is the most economical way to step up the power of any electronic or points inductive ignition system. Coil rise and saturation time is much shorter. |
PowerCore is absolutely essential for high compression and/or high rpm engines, and all lean-burn applications. For maximum horsepower and high rpm reliability, use PowerCore .
PowerCore is the perfect ignition
upgrade for vehicles where the ignition coil is incorporated within the
distributor, (Honda , Acura, General Motors). Simply connect the PowerCore
amplifier to the stock coil and get up to 50% more spark
power.
The PowerCore Technology
Think of it as a
supercharger for the coil. A supercharged engine (same displacement),
makes a lot more power. Same is true for the PowerCore coil amplifier. The
coil size stays the same, but the energy that is stored in the PowerCore
is supplied to the coil, resulting in added spark energy and higher
possible spark voltage. Just like the supercharger, which accelerates engine
rpm climbing-rate, the PowerCore accelerates coil saturation time.
What
does Nology’s PowerCore has to offer in three words or less? More
power, quicker!
If you're not using PowerCore™, you're not going as fast as you could
be.
Only for electronic or points inductive
ignition systems.Do NOT use PowerCore on CD ignitions.
For Cars, Trucks and
Motorcycles
PC-10
For ignition systems with active current
limiting and all automotive applications Model Year 1990 and
newer.
PC-30
For ignition systems without active current
limiting and most automotive applications Model Year 1990 and older with
2.5 to 3 Ohm ignition coils.
PC-50
For all points
inition system.
Please check Application Guide for the correct
PowerCore for your vehicle.
PowerCore for
Harley-Davidson
Don’t be left behind. Join the long list of
Harley-Davidson Drag-racers who are winning races using the PowerCore™ coil
amplifiers. More Top-Fuel races are won using PowerCore™ and HotWires than
in any other motorsport.
PC-30
For street driving and 3
Ohm ignition coils.
PC-30S
For Harley-Davidson
Drag-Racing
PC-50
For all points inition system.
| PowerCore Types | ||
|---|---|---|
| Type | Part# | Carb# |
| PC-10 Red | 160 001 061 | D-414-3 |
| PC-10 Black | 160 001 062 | D-414-3 |
| PC-30 Red | 160 001 301 | D-414-3 |
| PC-30 Black | 160 001 302 | D-414-3 |
| PC-30S Red | 160 001 351 | D-414-3 |
| PC-30S Black | 160 001 352 | D-414-3 |
| PC-50 Red | 160 001 501 | D-414-3 |
| PC-50 Black | 160 001 502 | D-414-3 |
| 6 PC-10 PC Plug-n-Play 2003 - 2000 Audi S4, 2.6 L Twin-Turbo See Installation here |
160 056 012 |
|
| 6 PC-10 PC Plug-n-Play 2002 - 1996 Audi A4/A6, 2.8 L Non-Turbo See Installation here |
160 056 011 |
|
| 4 PC-10 PC Plug-n-Play 2000 - 1996 Audi A4/VW Golf, Jetta, Passat, 1.8 Turbo See Installation here |
160 604 011 |
|
| 4 PC-10 PC Plug-n-Play 05 - 04 Ford Focus PZEV 2.3L See Installation here |
160 204 102 |
|
Click here for PowerCore Installation Instructions
| Products: |
| HotWires | ProFire | Spark Plugs |
PowerCore | Profire
Ignition Module | |